Flooring Contractor in Fishers, IN - Garage and Basement Floors Prepped Right
Landmark Epoxy Flooring of Indianapolis is a flooring contractor that coats and finishes concrete floors in Fishers, from attached garages and basements to shop and office floors for property managers and small business owners.
- Licensed and fully insured.
- Free estimates at your property.
- Replies within 1 business day.
Fishers homes and slabs as we find them
Fishers is mostly neighborhoods of newer homes, the kind with an attached two- or three-car garage and a basement under a good part of the house. Around downtown and along the main roads you'll also find townhomes, offices, restaurants and small shops, so our calls here come from homeowners, property managers and small business owners alike. It sits just north of Lawrence, and we do the same work there.
That mix shapes the job. A newer slab is usually sound, but it's often finished glassy smooth or sealed when it's poured, so it takes more grinding than people expect before a coating will hold.
Floor services we offer in Fishers
Epoxy Floor Coatings
A good fit for the attached garages and unfinished basements in Fishers subdivisions when you want a tough, cleanable floor over bare concrete that's starting to stain.
Commercial & Industrial Epoxy Floor Coatings
For the shops, offices and light industrial spaces around Fishers that see carts, forklifts or foot traffic all day and need a floor that's easy to keep clean.
Garage Floor Coatings
Fishers has a lot of two- and three-car garages on newer slabs, and we grind them first so the coating can bond and stand up to hot tires.
Polyaspartic Floor Coatings
When you can't spare the garage for long, polyaspartic cures faster than standard epoxy and resists yellowing where sun comes through an open door.
Metallic Epoxy Flooring
For finished basements, home bars and showrooms in Fishers where the floor is part of the look, metallic epoxy gives a poured, marbled finish no two floors share.
Urethane Cement Flooring
For restaurant kitchens and food spaces in Fishers that get hot washdowns and spills, urethane cement handles heat and moisture better than a thin epoxy.
Polished Concrete Flooring
A good choice for Fishers offices, retail spaces and basements where the slab is sound, because we grind and polish the concrete itself instead of adding a coating.
Stained Concrete Flooring
Adds color to a basement or patio slab in Fishers without hiding the concrete, and it works best on clean slabs without old sealer or patchwork.
Terrazzo Flooring
For lobbies, offices and busy entries around Fishers where the floor has to look sharp for years and stand up to steady foot traffic.
Basement Flooring
Many Fishers homes have basements waiting to be finished, so we check the slab for moisture first and pick a floor that suits it.
Concrete Grinding & Surface Preparation
Every coating we put down in Fishers starts here, because grinding opens up the concrete and takes off the smooth top layer a coating can't grip.
Concrete Sealing
For Fishers driveways, patios and garage floors where you want to keep oil and stains out of bare concrete without changing how it looks much.
Concrete Resurfacing & Overlays
When an older Fishers patio, walkway or garage slab has worn, pitted or patchy spots, an overlay gives it a new surface without tearing out the concrete.
Self-Leveling Concrete & Overlays
For Fishers basement and commercial slabs with dips or uneven spots, a self-leveling layer brings the floor flat before tile, vinyl or a coating goes down.
Pool Deck Coatings & Resurfacing
For backyard pools and neighborhood pool decks in Fishers, we coat or resurface tired concrete so it looks fresh and gives better footing when wet.
Concrete Floor Stripping & Removal
When a Fishers garage or basement already has a peeling coating or old paint, we strip it down to clean concrete before anything new goes on.
Get a free floor estimate at your Fishers property
Send the form and we'll get back to you within one business day to set a time. I come out, look at your floor and write up a free estimate, with no pressure to book.
- Based in
- Indianapolis, IN 46204
- Hours
- Mon–Fri: 6 AM–9 PM, Sat–Sun: 8 AM–10 PM
Working in Fishers: permits, registration and price
Permits and inspections in Fishers go through the city's Department of Planning & Zoning, so before we start I check with them for your address, and if your job needs a permit we pull it ourselves and the start date waits until it's in hand. The city also requires contractors to be registered before they work there, with insurance and contact details on file, so ask anyone you're thinking of hiring whether they are. If you're doing the work yourself, you don't have to register.
We're a flooring contractor based in Indianapolis, and Fishers is an easy run up I-69, so getting a crew and a grinder here is no trouble. What moves the price is mostly the slab: how much grinding it takes, how many cracks and chips need filling, whether an old coating has to come off, how big the floor is and which system you pick. The schedule turns on that same prep, plus any permit, and after I've looked at your floor you get a written estimate of what it needs.
Why Fishers garages and basements need the work
Garages here take most of their beating from cars. Hot tires can pull up a coating that's only stuck to the surface, so the store-bought kits a lot of people try first tend to let go right where the tires sit. When we come in after one of those, we strip what's left, grind and repair the slab, and put down a system made for vehicle traffic.
Basements are the other big one, because plenty of houses here still have bare concrete down there and moisture coming up through a slab will push a coating off it. I test before I recommend anything, and if your slab is too wet for a coating, I'll tell you that instead of selling you one.
How a floor job runs when you call us in Fishers
Here's how a floor job goes from your first call to the walk-through, and who you'll be dealing with at each step.
Call or send a message
Call (317) 429-4446 or send the form with your address and what the floor is used for. We get back to you and set a time for me to come out.
I look at the floor
I come out myself, check what's on the concrete and what shape it's in, and write up what it needs, with the prep, repairs and system spelled out so you know what you're paying for. It helps if you're home so we can talk about how you use the space.
We prep, repair and coat
Our crew preps the concrete first and fixes cracks and bad spots before the system goes down, and I'm on the job with them. You don't need to be home while we work, as long as we can get into the space.
Walk the finished floor together
Before we leave, we walk the floor with you so you can look it over and ask questions. We'll tell you when it's ready to walk on and when you can park on it.
Questions about flooring contractors in Fishers
How much does it cost to coat a garage floor in Fishers?
The cost of a garage floor coating in Fishers comes down mostly to how much prep your slab needs and which system you choose. A clean, sound slab costs less than one with an old coating to strip or spalled spots where the top has flaked away, and a full flake polyaspartic or metallic finish costs more than a clear sealer. I'll write you a number for your floor after I've looked at it.
What insurance does a contractor need to work in Fishers, IN?
The city's code asks registered contractors for a certificate of insurance with at least $500,000 per occurrence for death or bodily injury and $100,000 per occurrence for property damage, or a combined single limit of at least $500,000 per occurrence. Check the city's contractor registration page for the current terms, and keep in mind registration isn't the city vouching for anyone's work. We're licensed and fully insured, so ask me for our certificate.
What causes a garage floor coating to peel in a Fishers home?
Most peeling comes from the concrete or the prep, not the coating itself. A slab that wasn't ground, still has sealer or oil in it, or pushes moisture up from below won't hold a coating for long, and hot tires find a weak bond fast. That's why I'd rather tell you your slab needs work than coat over it.
How do I know if my basement floor is too damp to coat?
You usually can't tell by looking, so we test the slab before we pick a system. White powder on the concrete, dark damp patches or a musty smell are signs moisture is coming through. If it is, we either pick a system that can handle it or tell you the moisture needs fixing first.
Does living near a flood zone in Fishers affect a basement floor?
It can, because a basement that takes on water needs a different plan than one that stays dry. The city's online map shows FEMA flood hazard zones, using data Hamilton County keeps, so you can see where your lot falls. Either way, I check the slab for moisture before I recommend anything.
How long does a garage floor coating take in Fishers?
Most of the time goes into prep, so a clean slab with few repairs moves faster than one with old coating to strip or cracks to fill. The system matters too, since some cure faster than others before you can walk or park on them. I'll tell you how many days your floor needs when I write the estimate.
Book a floor estimate in Fishers
A look at your slab now tells you whether it's ready for a coating or needs work first, before you spend time picking colors.