Flooring Contractor in Greenwood, IN - Garage and Basement Floors Prepped Right
Landmark Epoxy Flooring of Indianapolis puts down epoxy, polyaspartic and polished concrete floors in Greenwood, IN, mostly in garages and basements, and we grind and repair the slab first so the coating has something solid to hold.
- Licensed and fully insured.
- Free estimates at your property.
- Replies within 1 business day.
Greenwood floors we get called out to see
Much of what we see in Greenwood is homes with attached garages, plus the shops, offices and light industrial spaces you'd expect this close to Indianapolis. The calls here look a lot like the ones from Whiteland. Homeowners are tired of a dusty, stained garage floor, people are finishing a basement, and business owners have a shop or showroom floor that's worn through.
Newer garage slabs often still have a curing compound or a slick troweled finish that a coating won't grab. Older slabs usually come with cracks, soaked-in oil or an old sealer that has to come off. Either way, the slab decides how much prep the job needs, and that's where I start.
Flooring services we offer in Greenwood
Epoxy Floor Coatings
A tough, cleanable coating for garages, basements and work rooms in Greenwood homes, put down over a ground slab so it bonds instead of peeling.
Commercial & Industrial Epoxy Floor Coatings
Carts, forklifts and spills wear down a bare slab in Greenwood shops, warehouses and service bays, so we build a thicker system made for daily traffic.
Garage Floor Coatings
Winter slush and road salt ride into Greenwood garages on every tire. A coated floor keeps that off the concrete, so it wipes clean in spring.
Polyaspartic Floor Coatings
A fast-curing coating for homeowners who need the garage back quickly. It also holds its color where afternoon sun comes through an open door.
Metallic Epoxy Flooring
A poured, swirled finish with real depth that works in finished basements, home bars and showrooms where the floor is part of the look.
Urethane Cement Flooring
Built for commercial kitchens, food prep areas and wash-down rooms in Greenwood businesses, where hot water, grease and temperature swings would break down ordinary epoxy.
Polished Concrete Flooring
We grind and polish the slab itself into a hard, glossy floor. It's a good fit for retail spaces and basements with sound concrete and no coating to maintain.
Stained Concrete Flooring
Stain soaks into the concrete instead of sitting on top, which suits basement floors and patios where you want color without a thick coating.
Terrazzo Flooring
Chips of glass or stone are set in a binder and ground smooth. Terrazzo suits Greenwood lobbies, offices and entryways that see heavy foot traffic for years.
Basement Flooring
Basement slabs can pull moisture up from the ground, so we check for it first and pick a system that suits the slab and the room.
Concrete Grinding & Surface Preparation
Grinding takes off sealer, paint and the slick top layer so a new floor can grip. It's the step a lot of peeling floors skipped.
Concrete Sealing
A sealer helps bare garage floors, walks and patios shed water and salt through Greenwood winters when a full coating isn't what you want.
Concrete Resurfacing & Overlays
When a slab is pitted, flaking or patched in a dozen spots, an overlay gives it a new top surface without tearing out and repouring the concrete.
Self-Leveling Concrete & Overlays
Self-leveling underlayment fills dips and uneven spots in basements and older rooms, so tile, plank or a coating can go down flat.
Pool Deck Coatings & Resurfacing
Greenwood pool decks take sun, chlorine and freeze-thaw. A resurfaced, textured deck covers worn concrete and gives bare feet better grip.
Concrete Floor Stripping & Removal
Old epoxy, paint, tile mastic or failing sealer has to come off before anything new goes down, so we take the floor back to clean concrete first.
Get a free floor estimate in Greenwood
We reply within one business day to set a time. Then I come out, look at your floor in person and write up what it needs. The estimate is free, and there's no pressure to book.
- Based in
- Indianapolis, IN 46204
- Hours
- Mon–Fri: 6 AM–9 PM, Sat–Sun: 8 AM–10 PM
What to check before a Greenwood floor job starts
In Greenwood, the city's Building Commissioner issues permits for building, altering or repairing a structure, and the permit comes before the work does. The commissioner's list of projects that need no permit covers things like pouring a concrete pad or patio. It doesn't mention floor coatings, so before we start I check with the Building Commissioner's office for your address, and if a permit is needed we pull it ourselves. Waiting on a permit is the main thing that can move a start date. How much prep the slab needs and how cold your garage is when we coat can move it too. Price turns on the slab's condition, the size of the floor and the system you pick, and I'll put all of that in writing for your floor. We're licensed and fully insured, and it's fair to ask any contractor for proof of insurance before you book.
We're a flooring contractor based in Indianapolis, IN, and Greenwood is an easy drive for our crew. I'm on the job with them. If you run a business, talk timing through with me at the estimate so prep and coating can fit around your hours. We do the same garage, basement and shop floors in Beech Grove, and if your city isn't listed on our site, call and ask.
Why Greenwood garage and basement floors wear out
Around Indianapolis the average first freeze comes in late October and the last one in mid-April, so a garage floor here spends nearly half the year under snowmelt, slush and road salt. Water that gets into bare concrete freezes and expands. Over a few winters that flakes the top off, and you'll see it as rough, pitted patches near the door and under the tires. We grind out the damaged surface, fill what needs filling and put down a coating that keeps salt water out of the slab.
Basements have the opposite problem, with moisture coming up from below instead of down from the tires. I check the slab before recommending anything, because a coating that traps water under it is the one that bubbles and lets go.
How a floor job runs when you call us in Greenwood
From your first call to the final walk-through, here's what happens, who shows up and what you get at each step.
Call or send the form
Call (317) 429-4446 or use the form, tell us what the floor is and roughly how big it is, and we'll set a time to come out. Photos help, but I still want to see it in person.
I look at your floor
I check the slab for cracks, moisture, oil and old coatings, then write up what it needs. The estimate spells out the prep, the system and the price, so you know what you're paying for before you decide.
We prep, repair and coat
If your address needs a permit, we get it before work starts. Then our crew grinds the slab, fixes cracks and pits and puts the system down, with me on the job.
Walk the finished floor together
Before we leave, we walk the floor with you and go over when it can take foot traffic and when you can park on it. The work is backed by our satisfaction guarantee.
Questions about flooring contractors in Greenwood
How much does an epoxy garage floor cost in Greenwood, IN?
I can't give a fair number without seeing the floor, because prep is the biggest part of the price and it's different on every slab. A newer garage with a clean surface needs less grinding than one with oil stains, cracks and old peeling paint. A clear sealer costs less than a full flake or metallic system. Your written estimate covers your floor line by line.
How long is a Greenwood building permit good for?
A permit from the Building Commissioner is valid for up to 365 days from the day it's issued. Work has to begin within 45 days, and the commissioner can revoke a permit after more than 90 days without activity. A 365-day extension is possible when the work will finish within it or the project justifies more time. If your job needs a permit, we pull it close to the start date for that reason.
What permit do I need if my Greenwood property is in a flood zone?
Any project that impacts the Flood Hazard Area needs a local floodplain permit from the city's Floodplain Administrator. Depending on scope, state and federal permits may apply too. You can look up your property on the Indiana Department of Natural Resources floodplain portal. Flooding isn't a frequent concern in Greenwood, but parts of the city have flooded badly before, so if your basement has taken water, tell me when I come out.
What causes garage floor coatings to peel in Indiana winters?
Most peeling comes from poor prep, not from the coating itself. When the slab wasn't ground, still had sealer or oil on it, or had moisture coming up, the coating sat on top instead of bonding. Hot tires and salty slush then pull it loose. We grind and repair the slab and check it for moisture before anything goes down.
How long does a new garage floor coating take before I can park on it?
That depends on the coating and how warm your garage is, so I'll give you the time for your floor at the final walk-through. Polyaspartic usually cures faster than standard epoxy. Every system cures slower in a cold garage, which matters here from late fall into spring. Keep the cars out until we tell you it's ready.
How do I know if my Greenwood basement floor is too damp for epoxy?
White powder on the concrete, dark damp patches or a musty smell usually mean moisture is coming through the slab. I check for it at the estimate visit before recommending a system, because a coating over a wet slab can bubble and lift. Some damp slabs can still be coated with the right primer, and some are better off polished or sealed.
Get your Greenwood floor looked at
Cracks and pitting are easier to fix before another winter works salt water into them, so call (317) 429-4446 or send the form.