Flooring Contractor in Speedway, IN - Garage and Shop Floors Prepped Right
Landmark Epoxy Flooring of Indianapolis puts down epoxy, polyaspartic and polished concrete floors in Speedway, IN, for garages, basements and small shops and businesses, with the slab prepped right underneath so the coating holds.
- Licensed and fully insured.
- Free estimates at your property.
- Replies within 1 business day.
Speedway garages, basements and shop floors
Most people know Speedway for the track and the museum inside it. On our jobs, it's a small town that runs its own offices, its own permits and its own water and sewer, right next to Indianapolis. The calls we get here come from homeowners with garages and basements, and from people who run shops and small businesses in town.
A lot of the slabs we look at here have years of use on them, with oil spots, patched cracks or an old coat of paint that's starting to lift. That means most jobs here start with getting back to clean, bare concrete before anything new goes down.
Floor work we do for Speedway homes and businesses
Epoxy Floor Coatings
A tough epoxy coat for garage, basement and shop slabs in Speedway, put down over concrete we've ground clean so it bonds instead of peeling.
Commercial & Industrial Epoxy Floor Coatings
For the shops, service bays and small businesses in Speedway, a heavier coating built for carts, vehicles and steady foot traffic, scheduled around your hours where we can.
Garage Floor Coatings
Garages here often have oil spots, tire marks and patched cracks. We grind, fix the slab and coat it so spills wipe up instead of soaking in.
Polyaspartic Floor Coatings
A faster-curing coating for a Speedway garage you need back soon, and it holds its color better than plain epoxy where sunlight hits the floor.
Metallic Epoxy Flooring
A poured epoxy with a swirled, glossy look for basements, home bars and show garages in Speedway, where the floor is part of the room.
Urethane Cement Flooring
For kitchens and food prep rooms in Speedway businesses that see hot water, strong cleaners and daily washdowns, since it handles heat and moisture better than standard epoxy.
Polished Concrete Flooring
When a slab is sound, we grind and polish the concrete itself into a hard, shiny floor with no coating to peel, which suits Speedway shops and storefronts.
Stained Concrete Flooring
Color that soaks into the concrete for Speedway basements and back rooms where the slab is in decent shape and you'd rather have warmth than gloss.
Terrazzo Flooring
Chips of stone or glass set in a poured floor, then ground and polished, for Speedway lobbies, entries and businesses that want a hard-wearing showpiece.
Basement Flooring
Basement slabs in Speedway homes often carry old paint, glue or damp spots, so I check the concrete first and pick a system that suits it.
Concrete Grinding & Surface Preparation
The step that decides whether a coating holds. We grind Speedway slabs to clean, open concrete and fix cracks and pits before anything goes on top.
Concrete Sealing
A clear sealer for Speedway garage and basement slabs that don't need a full coating but should quit soaking up oil, water and stains.
Concrete Resurfacing & Overlays
When a slab is worn, pitted or patched but still solid underneath, a thin overlay gives Speedway garages and shops a new surface without tearing it out.
Self-Leveling Concrete & Overlays
For uneven basement and shop floors in Speedway, a pourable overlay fills dips and low spots so the coating or flooring on top sits flat.
Pool Deck Coatings & Resurfacing
For Speedway backyards with a pool, we resurface or coat a worn, cracked deck so it looks cleaner and gives bare feet some grip.
Concrete Floor Stripping & Removal
Old paint, failed epoxy or tile glue has to come off before a new floor goes down, so we strip Speedway slabs back to bare concrete first.
Get a free floor estimate at your Speedway home or shop
Send the form and we'll reply within one business day to set a time. I come out, look at the floor in person and write up what it needs, free and with no obligation.
- Based in
- Indianapolis, IN 46204
- Hours
- Mon–Fri: 6 AM–9 PM, Sat–Sun: 8 AM–10 PM
Working in Speedway means working with the town's own offices
In Speedway, permits go through the Town of Speedway's Clerk-Treasurer Department, not Indianapolis, and the town issues a permit only after the fee is paid, so a job that needs one doesn't start until that's done. Before any work, we check with the town for your address, and if a permit is needed we pull it ourselves. We're licensed and fully insured. Your price comes down to the size of the floor, the shape the slab is in, whether old paint or coatings have to come off, how much crack repair it needs and which system you pick, and the schedule turns on those same things plus any permit. My written estimate lays out what your floor needs and what it'll cost.
The town also has its own Building Commissioner's Office and inspectors, who check that finished work meets construction standards, so when a permit applies we plan the job around their inspection. We do the same garage, basement and shop floors in Whitestown and Plainfield, and we don't assume one city's rules carry over to the next, which is why we check by address every time.
Garage and shop floors in Speedway see hard use
Garage floors take a beating. Hot tires pull up weak coatings, oil soaks into bare concrete, and a lot of the garages we see have a store-bought kit on them that's lifting in patches. We grind that off, fix the cracks and put down a system bonded to clean concrete, because coating over a failing layer just means it fails again with the new one on top.
Speedway also keeps its own code enforcement, aimed at keeping homes and businesses safe and well kept. In a shop or small business, the floor is a big part of that, so we can add grit to the topcoat where people walk on wet floors and pick a finish that's easy to keep clean.
How a floor job runs when you call us in Speedway
Here's what happens once you reach out, from the first call to the walk-through, so you know who's coming and what you'll get.
Call or send the form
Call (317) 429-4446 or use the form, and we'll get back to you to set a time for me to come out. If you know roughly how big the room is, tell us.
I look at your floor
I come out myself, check what's on the slab, the cracks, the stains and how solid the concrete is, and write up what it needs. That written estimate is where your price comes from, so there's no guessing.
We prep, repair and coat
If the town needs a permit, we pull it, and once an inspection is called in the job site has to stay available for 48 hours. Our crew grinds the concrete, fixes what needs fixing and puts the system down, and I'm on the job with them.
Walk the finished floor together
Before we leave, we walk the finished floor with you and go over how to care for it. You don't have to be home while we work, but we'd like you there for this part.
Flooring contractor questions in Speedway, IN
Do I need a permit for an epoxy garage floor in Speedway, IN?
The town's permit list doesn't name floor coatings, so we check with the town for your address before we start instead of guessing. Its fee schedule lists residential permits for additions, remodels, roofing, windows, siding, gutters and trim, and each kind of work on its required inspections list needs its own permit. If your job needs one, we handle it.
How long is a building permit valid in Speedway?
A permit from the town is good for one year after it's issued. If the work runs past that, the town renews it for another year at $50.00 per permit, with the right commissioner or inspector approving it. That's worth knowing if the floor is one piece of a bigger project that could run long.
What happens if an inspection doesn't pass in Speedway?
The town requires the re-inspection fee to be paid in full before it sends an inspector back. That's one more reason I'd rather fix a slab problem before we coat than after, so the work is right the first time someone looks at it.
How much does an epoxy garage floor cost in Speedway, IN?
It comes down to the size of the floor, the shape the concrete is in and the system you choose, so I give you a written number after I've seen the slab. Old coatings to strip, deep oil stains and crack repair add work, and a polyaspartic or metallic finish costs more than a basic coat. If the town says a permit is needed, its fee is on top, and for reference its schedule lists home remodels at $0.10 per square foot, $65.00 minimum.
What causes epoxy to peel on a Speedway garage floor?
Usually it's the prep, not the product. Coatings let go when they're rolled over dirty, oily, sealed or smooth concrete, or over an older coating that was already failing, so the new layer never grips the slab. We grind to clean, open concrete and fix the cracks first, and if your slab isn't ready for a coating, I'll tell you.
How do I know if my Speedway garage or basement floor can be coated?
Have someone look at it in person, and I do that myself at the estimate. I check for cracks, loose or flaking concrete, old paint or sealer, oil and damp spots. Then I tell you straight what the floor can take, whether that's a full coating, a sealer or repair work first.
Get your Speedway floor looked at
If you're eyeing a store-bought kit, have me look at the slab first, because peeling floors usually start with concrete that wasn't ready.