Flooring Contractor in Mooresville, IN - Garage and Basement Floors Prepped Right
Landmark Epoxy Flooring of Indianapolis is a flooring contractor working in Mooresville, IN. We put epoxy and polyaspartic coatings on garage and basement floors, polish and stain concrete, and resurface worn slabs for homes and small businesses.
- Licensed and fully insured.
- Free estimates at your property.
- Replies within 1 business day.
Mooresville floors, from old garages to pole barns
Mooresville sits southwest of Indianapolis in Morgan County, and the floors we see here cover the whole range. There are older houses close to downtown with detached garages and basements, newer subdivisions with attached two- and three-car garages, and past those, homes on a few acres with a pole barn or a shop out back. It has a lot in common with Plainfield just to the north, with plenty of people who commute into the city and plenty who want room to work on things at home.
That range changes the job. A garage slab in an older neighborhood has usually been patched, painted or soaked in oil over the years, while one in a newer subdivision may still have the builder's sealer on it, and each needs a different start before any coating goes down.
Floor services for Mooresville homes and shops
Epoxy Floor Coatings
Epoxy works on more than garages here, including laundry rooms, mudrooms off the garage and workshop floors, wherever bare concrete is dusting, staining or hard to keep clean.
Commercial & Industrial Epoxy Floor Coatings
For shops, warehouses and small businesses around Mooresville that need a floor to take forklifts, carts and spills, with prep and a system sized to the traffic.
Garage Floor Coatings
For the two- and three-car garages here that double as a workshop, a coated floor takes hot tires and dropped tools and hoses clean.
Polyaspartic Floor Coatings
A faster-curing coating that holds its color in sunlight, so it suits pole barns and garages that sit with the big door open all day.
Metallic Epoxy Flooring
For a finished basement, home bar or small showroom where you want a floor with depth and movement in it, not one flat color.
Urethane Cement Flooring
Built for small food businesses and wash bays around Mooresville that see hot water, grease and cleaning chemicals every day, where a standard epoxy wears out faster.
Polished Concrete Flooring
When the slab is sound, polishing it brings out the concrete and leaves a hard, shiny floor with no coating to peel, which suits shops and open basements.
Stained Concrete Flooring
A way to give an older slab color without covering it up, good for basements and porches here where some character in the concrete is welcome.
Terrazzo Flooring
For a business entry or a home where you want a floor built for heavy foot traffic, with chips of stone or glass set in and ground smooth.
Basement Flooring
Turning a bare Mooresville basement into usable space starts with checking the slab for moisture, then picking a coating that can live with what we find.
Concrete Grinding & Surface Preparation
Grinding takes off old paint, sealers and the weak top layer, so whatever goes down next bonds to clean concrete instead of the last owner's mistakes.
Concrete Sealing
A clear sealer is the simpler way to keep salt and stains out of a garage, patio or shop slab that's still in good shape.
Concrete Resurfacing & Overlays
When a garage or patio slab is pitted or flaking but still solid underneath, an overlay gives you a new surface without tearing the old concrete out.
Self-Leveling Concrete & Overlays
For older basement and shop floors here that are uneven from settling or patches, a self-leveling layer gives you a flat base before the next floor goes down.
Pool Deck Coatings & Resurfacing
Pool decks around Mooresville take sun, chlorine and freeze-thaw, so we repair the cracks and put down a textured surface that's less slick underfoot.
Concrete Floor Stripping & Removal
If a hardware-store kit or an old coating is peeling off your floor, we strip it to bare concrete so you can start over on a clean slab.
Get a written estimate for your Mooresville floor
We reply within one business day to set up a visit. I come out, look at your floor in person and write you a free estimate on site, and there's no pressure to book.
- Based in
- Indianapolis, IN 46204
- Hours
- Mon–Fri: 6 AM–9 PM, Sat–Sun: 8 AM–10 PM
Working in Mooresville: what shapes the job here
Building permits here go through the Town of Mooresville's Building Commissioner, and the local code says a permit for construction, alteration or repair of a building is obtained before the work begins. The rule doesn't name floor coatings, so I check with the commissioner's office for your address before we start, and if a permit is needed we pull it ourselves, which can move the start date until it's in hand. Whoever you hire, ask who's handling that and ask to see proof of insurance. We're licensed and fully insured.
As a flooring contractor based in Indianapolis, IN, it's a straight run down State Road 67 to Mooresville, and we work the same way here as we do in Greenwood and back up in Indianapolis. The price moves with the size of the floor, how much grinding and crack repair the slab needs and the system you pick, and the schedule turns on the permit question, how fast you can clear the space and, for a pool deck or patio, the weather. I put all of that in writing after I've seen the floor.
Why bare concrete wears out in Mooresville
Winter is hard on bare garage concrete here, because the salt and slush off the roads ride in on your tires and sit on the slab, and over a few seasons that can leave the top flaking and pitted. A coating seals that surface off so the mess wipes up, and where the top has already started to go, we grind and patch it before anything goes down.
The shops and pole barns on the bigger lots see tractors, mowers and fluids a house garage never will. We lean toward heavier systems there and spend more time on prep, because that's where a thin coat gives up first.
How a floor job runs when you call us in Mooresville
Here's how it goes from your first call or message to the day you get your garage, basement or shop back.
Call or send the form
Call (317) 429-4446 or fill out the form, and we'll get back to you to set a time for me to come out. It helps if you're home for the visit so you can show me what bugs you about the floor.
I look at your floor
I check what's on the concrete, look for cracks, flaking and moisture, and write up what the floor needs and what it'll cost. You see the number and the reasons for it before you decide anything.
We prep, repair and coat
Our crew grinds the slab, fixes cracks and bad spots, then puts the system down, and I'm on the job with them. If the job needed a permit, we've already pulled it by this point.
Walk the finished floor together
Before we leave, we walk the floor with you and tell you when it's ready to walk on and when you can park on it. The work is backed by our satisfaction guarantee.
Questions about floor coatings in Mooresville
Do I need a permit to coat my garage floor in Mooresville?
We find that out for you before we start, and if one is needed we pull it ourselves. The local code requires a building permit before construction, alteration or repair of a building begins, and the wording doesn't spell out floor coatings, so I check for your address instead of guessing. You can read the building permit rules yourself if you'd like to see the wording.
How much does an epoxy garage floor cost in Mooresville?
Your price comes from the size of the floor, how much prep the slab needs and the system you choose. A clean, solid slab with a flake coat sits at the low end, and a floor with old paint to grind off, cracks to fill or a metallic finish costs more because of the extra labor and material. A pole barn or shop floor that sees equipment usually needs a heavier system, which adds to it too.
What is the best time of year to coat a pool deck in Mooresville?
Outside the frost season, which around here usually runs from late October to mid April. At Indianapolis the average first freeze is October 26 and the average last freeze is April 17, so I plan outdoor coating and resurfacing for the months between. Garage and basement floors are under a roof, and I'll tell you at the estimate whether yours is warm enough to do in the colder months.
What causes a garage floor coating to peel?
Usually it's the concrete underneath or the prep, not the coating itself. A coating put over a slab that wasn't ground, one with oil soaked in, an old sealer on top or moisture coming up from below can't grab the concrete, and it lets go once hot tires start pulling at it. That's why we grind to clean concrete and check for those problems before anything goes down.
How do I know if my basement floor in Mooresville is too damp to coat?
You usually can't tell by looking, so I test it at the estimate before I recommend anything. White powder on the concrete, dark patches that come and go, or paint that bubbled and flaked are signs water is moving through the slab. If it is, I'll tell you straight, because a coating over a wet slab usually won't stay down.
Does a floodplain affect floor work on my Mooresville property?
Only if the work needs a local floodplain permit, which matters for properties in or near flood-prone areas. In that case the state requires a floodplain review, called a FARA, for local floodplain permitting in mapped A zones, where the upstream drainage area is more than 1 square mile, and in unmapped areas known to flood. I check whether that applies to your address when I check on the permit.
Tell us about your Mooresville floor
If you call (317) 429-4446 or send the form and tell me what's on the floor now and what you want it to do, I'll show up ready to test for the things that matter on your slab.